Using settings files

The colorizer accepts user defined settings when a file is passed with the -s switch. This file is a simple Windows ini style format consisting of various sections to define colors and geometry data for the colored regions.

The distribution for the colorizer comes with a set of predefined styles in ‘styles’ directory that define custom color settings. In most cases this is all you will want to change for a custom settings file and you can copy one of these styles to start out with an initial template. Once you have a completed settings file that you like you can optionally place it in the ‘styles’ directory to access it by logical name if desired.

Each settings file consists of a series of named sections marked in square brackets. Each section contains a series of key = value pairs, one per line. Any omitted keys will take their value from the defaults defined in default_settings.cfg. The keys are case insensitive.

Variables

You can define keys to be used as variables substituted in the values for other keys. A variable is substituted by referencing it with %(variable-name)s. Variables must appear in the same section where they will be referenced for substitution.

Colors

The "[colors]" section contains all of the color definitions for a color style. The color keys correspond to defined regions in the master default_settings.cfg file plus a few special colors for backgrounds and certain grid modes.

You can use a variety of formats for specifying a color:

  • Hex format, #rgb or #rrggbb

    ex: #fff, #00ff00

  • rgb(red, green, blue) using integers from 0-255 or percentages

    ex: rgb(0,12,200), rgb(100%, 50%, 25%)

  • hsl(hue, saturation%, lightness%)

    ex: hsl(0, 100%, 25%)

  • HTML and X11 color names

    ex: Red, red, blue, SlateGray

General colors

Key Description
Background Overall background color
Grid-Background Background of grids
Grid Grid lines
Trace Signal traces
Trace-Reconstruction Color used for reconstructed trace segments that cross the grid lines

Region colors

These are the colors for the regions in each image.

Key Description
Time Time in upper left corner
Channels Channel list on left side
Channels-Text Color for text inside channel list boxes
Channels-Background Background fill for boxes in channel list
Timebase Timebase in lower left side
Probes Probe voltage and coupling in lower left corner
Left-Marker Trigger level and trigger delay markers on left and bottom of grid
Right-Marker Trigger level and trace offset markers on right of grid
Cursors Cursor readout on bottom
Trigger Trigger mode and settings on bottom
Menu Menus on right side
Menu-Text Color for text inside menu list boxes
Menu-Background Background fill for boxes in menu list
Sample-Rate Sample rate in lower right corner
Trig-Mode Trigger mode
_images/regions_single.png

Special mode colors

The Parameter measurement and XY modes have special layouts with additional data readout regions. When one of these grid modes is detected in a captured image these color settings become active.

Key Description
Parameters Parameter values in parameter grid mode
Parameters-Span Bar over top of parameter mode grid showing span for measurements
XY-Cursors XY cursor values in top left of XY grid modes
_images/regions_param.png _images/regions_xy.png

LeCroy Colorizer

Oscilloscope screencap colorizer

Previous topic

LeCroy 93xx Colorizer

Table Of Contents

Other projects